Bashan plane shaking screen is a classic inertial screening equipment. With the latest design concept and unique structure, this screen equipment is efficient and can be applied in many fileds. It combines the siege - the circular movement, the top - the throwing movement. So the flat screen is suitable for the screening of small particles and fine powders, spherical, cylindrical, sheet, and even irregular shape which can network block. Screening dry and wet material are both work.
Plane shaking screen is wildly used in mining, building, metallurgy, casting, abrasive, chemical, light industry, medicine, food and other industries.
V-belt drive 180-320 rmp low-frequency, conventional motor. Adjustable rigid crankshaft with inclination
The acceleration is 1-1.5g.
1. Observation port 2. Outlet 3. Bottom frame 4. Drive shaft
5. Tension spring 6. Pusher port 7. Spindle 8. Base
9. Pulley 10. Belt 11. Motor 12. Eccentric mechanism 13. Shield 14. Fueling port 15. Locking device 16. Sieve
17. Seal cover 18. Feeding port
Rugged independent module design, silicone seal. Easy to install and remove, it takes about 15 minutes to complete.
Principle of movement
Three-dimensional swing movement, a reasonable combination of the rotation of the material up and down the flip. Centrifugal rate: 35mm (adjustable) high frequency of short-range vibration.
All the parameters of the equipment, such as eccentricity, radial speed and tangential inclination, can achieve the best results.
60-70dbA, with the upper and lower weights can be fully balanced.
Auxiliary cleaning system:
A. Clean the ball B. Roller or flat brush clean
C. Jet clean D. Air and brush combination
1. Can achieve single or multi-layer high-yield screening
Can be sieved up to 6 particle size. The sieve diameter is from 600mm (24 inches) to 2.6mm (104 inches); small shaking sieve can be equipped with 4 layers of sieve, large can reach 5 layers, while providing 5 to 6 groups of grading.
For a single graded product, our technology can help you get double or even higher capacity on the same sieve.
2. Maximize screening efficiency and product efficiency
The principle of the shaking screen is actually a mechanical simulated manual sieves. Smooth acceleration with low speed operation can ensure that the material always rolls on the surface of the screen especially for dry, low-density particles. Meanwhile effectively reduces the wear caused by high abrasive products on the screen.
3. Each layer of the screen can meet the need of particle’s grading size accuratel
The material is fed from an almost horizontal sieve center and diverges to the periphery along the spiral curve. At the same time, as the vertical acceleration increases, the fine particle product is forced to pass through the screen surface.
4. Easy and convenient cleaning
With our multi-cleaning system, it is not a difficult thing anymore to clean the mesh 30 microns. This system includes clean ball, independent gear-driven brush, jet cleaning and jet / brush combination cleaning system. For viscous or static materials usually use jet cleaning system.
5 .effectively reduce the breakage of fragile materials
The hand sieve can give the material a mild treatment. The shaker perfectly reproduces the same movement, which is used in a variety of occasions where particle breakage is prohibited, such as particle spray drying of coffee, bio pharmaceutical powder products, and powdered milk and metal powders
6 .effectively reduce maintenance time
Quick and easy to disassemble and install as fast as 15 minutes. After installation is done, only need to lubricate the bearing to ensure the continuous full load operation of the equipm
7. less maintenance costs
The main parts include: screen, seals, rubber ball or brush.
8. dynamic base load can be ignored
Each shaker will be adjusted to the full balance before it is shipped. So on the user's site, it can be placed on a very high steel structure, taking into account the complexity of the dynamic load need to start again before the balance test;
9. low noise, low energy consumption
Due to the modular design is simple and low running noise characteristics, shaking is always maintained at 60 to 70dB to ensure the smooth and quiet operation. The ordinary Y series motor, can have the minimum mechanical driven power 0.25KW. For the maximum load capacity 2 tons, it only needs 5.5KW
10 .absolute dust control
In addition to the existing ventilation system, the shaker does not require any air purification or dust collection auxiliary device. The system can be equipped with air tightness and vacuum design, as well as nitrogen purification.
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.